Dongguan Ming Rui Ceramic Technology Co.,ltd
Dongguan Ming Rui Ceramic Technology Co., Ltd
Add to Cart
Insulator Alumina Ceramic Pump Plunger for Water Pressure Pump
Specification of Ceramic Pump Plunger:
We manufactures custom technical ceramics, covering a wide range of customer requirements .We make use of several forming and machining techniques to process components made from alumina Ceramics, This material may be used in applications that require High elevated temperatures ,High dielectric strength, excellent electrical resistance . wear or corrosion resistance .high temperature capability .High Electrical insulation.
Applications of Ceramic Pump Plunger :
For water pressure Pump ceramic plunger , Electric appliance industry/Automotive industry/Mechanical industryEngineering industry/Electrical heating element industry/LED Lighting Industry
Available Specifications ( mm )
Sphere: Φ0.2-0.4 / Φ0.4-0.6 / Φ0.6-0.8 / Φ0.8-1.0
Φ1.0-1.2 / Φ1.2-1.4 / Φ1.4-1.6 / Φ1.6-1.8
Φ1.8-2.0 / Φ2.0-2.2 / Φ2.2-2.4 / Φ2.4-2.6
Φ3 / Φ5 / Φ6.5 / Φ10 / Φ12 / Φ15 / Φ20
Φ25 / Φ30 / Φ35 / Φ40 / Φ45...
Cylinder: Φ3x3 / Φ5x5 / Φ7x7 / Φ10x10
Φ12.7x12.7 / Φ15x15 / Φ20x20
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.
Product Description
Precision Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries.Insulator Ceramic Substrates Ceramic Shaft High - Speed Spray. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs.Insulator Ceramic Substrates Ceramic Shaft High - Speed Spray,Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:
Insulator Alumina Ceramic Pump Plunger for Water Pressure Pump
High temperature ceramics – crucibles, nozzles, lasers, furnace/kiln fixtures
Insulator Alumina Ceramic Pump Plunger for Water Pressure Pump
Wear and corrosion resistant ceramics – plates, housings, gages, caps/lids
Insulator Alumina Ceramic Pump Plunger for Water Pressure Pump
Electrical insulation ceramics – contact blocks, standoffs, fasteners, spacers
Insulator Ceramic Substrates Ceramic Shaft High - Speed Spray
Precision Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.
Insulator Ceramic Substrates Ceramic Shaft High - Speed Spray
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium | | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Insulator Alumina Ceramic Pump Plunger for Water Pressure Pump |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Insulator Alumina Ceramic Pump Plunger for Water Pressure Pump |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
