Dongguan Ming Rui Ceramic Technology Co.,ltd
Dongguan Ming Rui Ceramic Technology Co., Ltd
Add to Cart
High Purity Alumina Ceramic Tube Insulators One End Closed
Tag key words: ceramic tube insulators
High purity alumina tube
| Product Name | High Purity Alumina Ceramic Tube Insulators One End Closed |
| Material | 95%, 99%, 99.5% and 99.7% Alumina |
| Color | Ivory |
| Standard | international standard |
| Straightness | ≤3‰ |
| Properties | Thermal resistance/ Wear resistance/ Stable Chemical Performance/ Corrosion resistance/ Electrical insulation, High compressive strength |
Mingrui ceramic tube insulators are 99.5% to 99.8% high purity and offer elevated temperature stability. Alumina tubes are available in custom sizes, including American and Metric, and offer a low material cost.
Minerals containing alumina make up nearly 15% of the earth’s crust. This makes it practically inexhaustible and versatile. Alumina provides the combination of low thermal expansion, superior thermal conductivity and high compressive strength making it thermal shock resistant and the ideal product for alumina tubes. Our alumina tube models have elevated dielectric properties and are gas tight providing a higher vacuum or protective atmosphere when at an extreme temperature.
These ceramic tube insulators offer:
Typical Physical Properties of ceramic tube insulators | ||
| MATERIAL | ALUMINA | |
| Composition | 99.80% AL2O3 | 99.5% AL2O3 |
| Bulk Specific Gravity (g/cc) | 3.9 | 3.8 |
| Color | Ivory | Ivory |
| Impenetrability | Gas Tight | Gas Tight |
| Dye Penetration A.S.T.M. | Tight | Tight |
| Flexural Strength (psi) | 70,000 | 50,000 |
| Compressive Strength (psi) | 370,000 | 350,000 |
| Tensile Strength (psi) | 43,000 | 33,000 |
| Maximum Working Temperature | 1800°C | 1750°C |
| Likely Sag Temp. Unsupported Tube* | 1600 oC | 1600 oC |
| Thermal Conductivity 24oC | 230 | 200 |
| (BTU-in/ft2-hr-oF) 800oC | 60 | 50 |
| Dielectric Strength 24oC V/Mil | 300 | 270 |
| Thermal Expansion (per oC x 10-6) | 8 | 8.4 |
| (24oC-1000 oC) | ||
| Hardness (Moh’s scale) | 9 | 9 |
| * Temperature at which an empty tube, 1 1/4″ diameter, suspended across an 18″ span, will sag 1/4″ in 1 hour. | ||
| Where sag is not acceptable, tubes must be adequately supported along the full length. | ||
1. What kind of industry ceramics do you have ?
We specialized in 95% 97% 99% alumina ceramic and zirconia ceramic parts .
2. What kind of molding method do can you supply ?
Dry Pressing , isostatic pressing , grouting , hot-chamber die casting , tape casting , injection molding, etc, injection molding and isostatic molding is the most commonly used.
3.What stabilizer do you use when processing ?
Yttria stabilizer is the most commonly used in our industrial ceramic parts.
4.Can you produce free samples for me ?
Yes usually , we can produce free samples for you but it is up to the product complexity .
5.What terms can you accept for payment ?
T/T, L/C , Western union , Money Gram and Paypal is welcome , but paypal and western union only for small -sum payment.
More Product Photos :
