Dongguan Ming Rui Ceramic Technology Co.,ltd
Dongguan Ming Rui Ceramic Technology Co., Ltd
Add to Cart
99% Alumina Zirconia Ceramic Pin Alumina Ceramic Shafts With Wear Resistant
| Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, 200T isostatic pressing and extrusion productive technology etc. | ||||
| Material | Unit | Steatite ceramics | 95% alumina ceramics | 99.5% alumina ceramics |
| Density | G/cm3 | 2.7 | 3.65 | 3.85 |
| Highest application temperature | °C | 1100 | 1500 | 1800 |
| Bending strength | Mpa | 150 | 300 | 340 |
| Compressive strength | Mpa | 900 | 3400 | 3600 |
| Hardness | HV0.5 | 800 | 1800 | 2000 |
| Insulation breakdown strength | KV/mm | 10 | 15 | 18 |
| Processing technology | ||||
| Process range (mm) | ||||
| Outside Diameter | 1---300 | |||
| Inside Diameter | 0.5---300 | |||
| Length | 0.5---1200 | |||
| Accuracy of working (mm) | ||||
| Perpendicularity | 0.01 | |||
| Concentricity | 0.01 | |||
| Roundness | 0.005 | |||
| Straightness | 0.005 | |||
| Parallelism | 0.01 | |||
| Planeness | 0.005 | |||
| Roughness | 0.05 | |||
| Fit clearance | 0.005 | |||
alumina ceramic tube, precision ceramic shaft, fine ceramic pin, alumina ceramic shaft, high purity alumina pin, 99.5% alumina
| Manufacturing Options | Advanced Finishing Services |
| Injection molding | Precision grinding and lapping |
| Roll compacting | Laser machining |
| Extruding | Engineering design and support |
| Co-firing | Metallizing |
| Isostatic pressing | Ceramic-to-metal brazing |
| Dry pressing | Specialized coatings |
| Hot pressing | Threaded components |
| Tape casting | Precision motion components |
| Slip casting | Complex clean room assemblies |
More photos :
Produce and machining
We can produce different sizes and shapes of the rod for specific applications to different custom products.Such as drilling, polishing, stripes, concave and convex, screw holes, metal parts position and so on
1. Can Be Custom By Drawing Or The Parameter
2.Can Be Offer a Samples Within 1--10 Qty
3. The Shipping Time Of The Samples Within 2days
4. Quick Delivery Via Fedex,Dhl,Ups,Tnt Etc.
For more informations (the price,payment etc), Please contact us or email: admin@cerampart.com