Ceramic Plunger Sleeve Kits / Ceramic Piston Sleeve for Interpump Pump Repair Kits
Tag key words : ceramic Plunger Sleeve Kits / Ceramic Piston Sleeve
General Pump Ceramic Plunger Sleeve Kit | Interpump Piston Sleeve Repair General Pump, sometimes known as Interpump, produces one of the highest quality pressure washer pumps in the industry. All pumps will require service, maintenance or repair at sometime during their life, due to being under constant strain and motion. Abuse can also cause downtime and costly repair, and running in bypass for extended periods of time (pressure washer is running, but no water flow through the nozzle) can cause high temperatures within the pump head, resulting in damage to water seals and ceramic piston sleeves. If a ceramic plunger sleeve is broken or cracked, it can allow water into the pump body, mixing with the pump oil, which reduces the lubrication of the pump, causing possible pump failure. Also, if broken, the shards of ceramic from the piston sleeve can flow through the water system, damaging other pressure washer components such as the unloader valve. | | |
Use this 8.703-191.0 18mm ceramic plunger on General Pump EZ and TX Series pump models shown below. A cracked or broken General Pump Ceramic Piston can allow water into the pump crankcase, reducing lubrication and possible pump damage. A broken ceramic plunger can also sometimes be seen by a slight water leak between the pump body and pump manifold. Failure to replace a broken ceramic piston can result in further damage to pump, pump seals, unloader valves, and other pressure washer parts. General Pump Part 44040109 General Pumps: TX1810E179, TX1812E179, EZ2542E, EZ2542S, EZ3042S REPLACES PART NUMBERS: 1-44040109, 104804, 87031910 | | |
General Pump Ceramic Piston Performance:
| Alumina Content | Unit | 80-85% | 90-96% | > 99.5% | 99% |
| General Application | | Lower Cost Electrical & Mechanical | High Strength, Wear Resistant, Electronic, Insulating, Mechanical, Structural & Metalizing | Extremely High Purity, Temperature & Strength; Excellent Corrosion & Wear Resistance | Porous, Easily Degassed & Machinable |
| Porosity | % | 0-.05 | 0-.05 | 0-.05 | Variable |
| Density | gm/cm3 | 3.45-3.50 | 3.55-3.75 | 3.75-3.95 | 2.4 |
| Flexural Strength | kpsi | 35.0-40.0 | 40.0-50.0 | 50.0-55.0 | - |
| Comprehensive Strength | kpsi | 260.0 | > 300.0 | > 300.0 | - |
| Tensile Strength | kpsi | 15.0-20.0 | 20.0-28.0 | 20.0-28.0 | - |
| Linear Coefficient of Thermal Expansion | (cm/cm/°C) 25-300°C 25-700°C | 5.9X10-6 6.5X10-6 | 6.3X10-6 7.0X10-6 | 6.5X10-6 7.5X10-6 | 6.5X10-67.5X10-6 |
| Dielecctric Constant at 25°C | 1 MH 10 MH | 8.5-8.9 8.4-8.8 | 9.2-9.8 9.0-9.6 | 9.5-9.9 9.3-9.7 | - |
| Dielectric Strength | Volt/mil | 200 | 225 | 225 | - |
| Te Value | °F °C | 1472 800 | > 1832 > 1000 | > 1832 > 1000 | > 1832 > 1000 |
| Thermal Conductivity at 25°C | cal/sec/cm2/cm/°C | .03-.04 | .04-.06 | .07-.08 | - |
| Safe Use Temperature | °F °C | 2550 1400 | 3000-3100 1650-1700 | 3275 1800 | 3275 1800 |
Ming Rui Ceramics Limited has been specializing in the manufacture of Zirconia ceramics part and Alumina ceramic parts used in medical instruments,textile machines, e-cigarattes, dispensing machines, lithium battery, auto mobile, petrochemical industry and other high temperature and corrosive conditions for over 10 years. Consistent quality, dependable support and delivery, and innovative solutions have enabled us to expand our business world wide.
Our Worshop:
Other related products:
Except alumina ceramic piston pump, we also supply zirconia ceramic tube, rod for normal use, also have ceramic substrate, ceramic plate, ceramic bush, ceramic sleeve, valves, ceramic shafts, nozzles, etc.Welcome you to contact us for more information!
