Dongguan Ming Rui Ceramic Technology Co.,ltd
Dongguan Ming Rui Ceramic Technology Co., Ltd
Add to Cart
Feature:
Advantage Of 95% 97% 99% Alumina Ceramic Pump Plunger Shaft Rod
1. High purity, 99.7% alumina purity make sure high working temperature.
2. Tight tolerance, we can grind OD to make tight tolerance for easy insulation.
3. Fast delivery, we have large quantity tubes in stock.
4. Inspection: each single rods will be checked before shipping.
5. Low transportation cost. We have long time cooperated shipping agency, which can provide very low prices.
The application of our product:
Ceramic shaft,sleeve for different pump.
Ceramic plunger for high pressure cleaner.
Wearlessness,resistant acid-base and high intensity ceramic assembly apply to petroleum,chemical industry.
Wearlesness,corrosion resistance,thermos table parts apply to precision machine.
Type of ceramic plunger shaft us manufacturer (including but not only belows)
| Shaft plunger | Pump plunger |
| Wear Plunger rod | Filling Pump plunger |
| Pins rod | Water Pump plunger |
| Metering Pump plunger | Plunger rod |
| Dosing Pump plunger | Sleeve and bushing plunger |
| Machinable plunger | Piston plunger |
| Tip: For different industries, equipment,and environment, ceramic plunger have different function, We can machining ceramic tubes, such as surface polishing, internal and external pipe wall threads, metal parts bonded, different shapes etc by custom requirement. | |
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium | | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
The properties of our commodity :
| Properties | Units | 95 Alumina | 99 Alumina | ZrO2 |
| Density | g / cm³ | 3.65 | 3.92 | 5.95-6.0g/cm³ |
| Water absorption | % | 0 | 0 | 0 |
| Coefficient of thermal expansion | 10-6/K | 7.9 | 8.5 | 10.5 |
| Modulus of Elasticity Young's Mod | GPa | 280 | 340 | 210 |
| Poisson's ratio | / | 0.21 | 0.22 | 0.3 |
| HV Hardness | MPa | 1400 | 1650 | 1300-1365 |
| Flexural Strength at room temperature | MPa | 280 | 310 | 950 |
| Flexural Strength at 700°C | MPa | 220 | 230 | 210 |
| Compressive Strength at room temperature | MPa | 2000 | 2200 | 2000 |
| Fracture Toughness | MPa *m 1/2 | 3.8 | 4.2 | 10 |
| Heat conductivity at room temperature | W/m*k | 18-25 | 26-30 | 2-2.2 |
| Electrical Resistivity at room temperature | Ω*mm2 /m | >1015 | >1016 | >1015 |
| Max use temperature | °C | 1500 | 1750 | 1050 |
| Resistance to acid and alkali | / | high | high | high |
| Dielectric Constant | / | 9.5 | 9.8 | 26 |
| Dielectric Strength | KV/mm | 16 | 22 | / |
| Thermal Shock Resistance | T ( °C ) | 220 | 180-200 | 280-350 |
| Tensile Strength at 25 °C | MPa | 200 | 248 | 252 |
Delivery:
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.