Dongguan Ming Rui Ceramic Technology Co.,ltd
Dongguan Ming Rui Ceramic Technology Co., Ltd
Add to Cart
Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components
Key words : Ceramic Injection Molded / Molding products
Ceramic injection molding (CIM), is a net-shaping process which enables large scale production of complex-shaped components for use in a diverse range of industries. It combines plastic injection molding techniques and performance attributes of ceramic and metal powders. Ceramic injection molding (CIM) uses ceramic powders such as alumina, zirconia, titania, ferrite powders, etc. It was introduced in 1940's, but for the next thirty years it was of minor interest to ceramic industry. In 1970's and 1980's CIM provided cost-effective fabrication method for mass production of ceramic parts for automotive industry. Today more than 300 companies practise PIM. Most of them practise MIM technology (>70%). Small percentage (5%) produce metals, ceramics and carbide components and about 25% practice CIM technology.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.
Product Description
Mingrui Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries. Wear And Corrosion Resistant Machining Ceramic Parts Welding Equipment. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs. Wear And Corrosion Resistant Machining Ceramic Parts Welding Equipment, Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:
Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components
High temperature ceramics – crucibles, nozzles, lasers, furnace/kiln fixtures
Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components
Wear and corrosion resistant ceramics – plates, housings, gages, caps/lids
Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components
Electrical insulation ceramics – contact blocks, standoffs, fasteners, spacers
Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components
Mingrui Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.
Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Zirconia Alumina Ceramic Injection Molded / Molding Products / Parts / Components |
Produce and machining
We can produce different sizes and shapes of the ceramic products for specific applications to different custom products.Such as drilling, polishing, stripes, concave and convex, screw holes, metal parts position and so on
Delivery:
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.