Dongguan Ming Rui Ceramic Technology Co.,ltd
Dongguan Ming Rui Ceramic Technology Co., Ltd
Add to Cart
Alumina Ceramic Parts 99% Al2o3 Alumina Ceramic Terminal Block Coil Groove
Mingrui Alumina Ceramic Parts Including 95% 97% 99% 99.9% Alumina Ceramic , Alumina ceramic terminal Block are customed according to customer requirements .
Alumina Ceramic Parts Alumina Ceramic Blocks with Good mechanical strength, electrical insulation, high-frequency loss, thermal conductivity, and resistance to heat, wear and corrosion. Sapphire is single-crystal alumina.
Alumina ceramic parts are very hard, dense material ofexceptional strength. Alumina ceramic exhibitsresistance to both high temperature and corrosion. Electrical properties of alumina ceramic aluminum oxide include high volume resistivity as well as low loss characteristics at high frequencies. We produce many grades of Alumina Oxide Ceramic Parts Alumina Ceramic Blocks by isostatic press, dry pressing . By using these processes and different chemistry, alumina ceramic parts properties are enhanced to meet most engineering requirements. Applications for alumina oxide ceramic include pump seals, temperature sensors, knife sharpeners and refractory anchors.
Mingrui provides customers with a singular source for design, manufacture, and finishing of Alumina Ceramic Parts to ensure the highest possible quality and precision. Secondary finishing options include:
• Pre/post-sintered machining • Metallization services • In-house analytical labs • Laser machining/cutting • Rapid prototyping • RF Shielding • Bonding & joining
| Characteristics | Unit | 95 Al2O3 | 99 Al2O3 | ZrO2 |
| Crystal Structure | - | hexagonal | hexagonal | tetragonal |
| Color | - | white | ivory | white |
| Density | g/cm3 | 3.65 | 3.88 | 5.95 |
| Water Absorption | % | 0 | 0 | 0 |
| Young's Modulus | Gpa | 280 | 350 | 205 |
| Vickers Hardness | Gpa | 14 | 20 | 12 |
| Flexural Strength | Mpa | 280 | 300 | 900 |
| Compressive Strength | Mpa | 2000 | 2500 | 2200 |
| Thermal Conductivity | W/(m·k) | 18-25 | 30 | 2.2 |
| Thermal shock resistance | Δ(℃) | 220 | 180-200 | 280-350 |
| Max. Working Temperature | ℃ | 1500 | 1700 | 850 |
| Volume Resistivity | Ω·cm | >10^15 | >10^14 | >10^12 |
| Dielectric Constant (1 MHz ) | - | 9.5 | 9.8 | 26 |
| Dielectric Strength | kV/mm | 16 | 22 | - |
Mingrui Ceramics provide advanced ceramics on critical wear surfaces of Alumina Ceramic Parts to maximize service life.
Company Introduction :
1. What kind of industry ceramics do you have?
We specialized in 95% 97% 99% alumina ceramic and zirconia ceramic parts.
2. What kind of molding method can you supply?
Dry Pressing, isostatic pressing, grouting, hot-chamber die casting, tape casting, injection molding, etc, injection molding and isostatic molding is the most commonly used.
3.What stabilizer do you use when processing?
Yttria stabilizer is the most commonly used in our industrial ceramic parts.
4.Can you produce free samples for me?
Yes usually, we can produce free samples for you but it is up to the product complexity .
5.What terms can you accept for payment?
T/T, L/C , Western union , Money Gram and Paypal is welcome , but paypal and western union only for small-sum payment.
More Product Photos :
Our factory Machinery show :