Dongguan Ming Rui Ceramic Technology Co.,ltd
Dongguan Ming Rui Ceramic Technology Co., Ltd
Add to Cart
Semiconductor Ceramics Ring with Vacuum Slot for Picking Up Arm Ceramic
Tag key words : semiconductor ceramic ring arm ceramic
Ceramic end-effectors are used to manipulate and carry silicon wafers through the whole production in the semiconductor process. It enables the handling of large-size wafers and can be designed with vacuum channels in order to hold the part.
| In robotics, an end-effector is a device or toll connected to the end of a robot arm. The structure of an end effector and the nature of the programming and hardware that drives it, depends on the intended task. semiconductor ceramic ring can accommodate only certain end-effector task modes without changes to the ancillary hardware and/or programming. It is not possible to directly replace a gripper with a screwdriver head, for example, and expect a favorable result. It is necessary to change the programming of the robot controller and use a different set of end-effector motors to facilitate torque rather than gripping force. Then the gripper can be replaced with a driver head. |
The specification of ceramic end-effectors:
High Performance Ceramic End-Effectors With Good Durability
Ceramic Robotic Arm/ End-Effectors For Semiconductor Industry
Custom Ceramic Robotic Arm For Semiconductor Processing
semiconductor aluminal ceramic end effector with factory price
custom ceramic arm sleeves with good quality assurance and long service life
Ceramic End-Effectors /Robot Arms For Semiconductor Process Equipment
Our semiconductor ceramic ring is made of high purity alumina ceramic, it is widely used in the industries of semiconductor,photoelectric industry,IC,wafer,TFT LCD,etc. We have a team to make professional design and produce various kinds of precision ceramic arms to meet the modern trend of semiconductor manufacturing industry. We can also produce according to customer's request.We can develop all kinds of wafer using ceamic arm in special vacuum enviroment.
semiconductor ceramic ring are used to manipulate and carry silicon wafers through the whole production in the semiconductor process. It enables the handling of large-size wafers and can be designed with vacuum channels in order to hold the part.
In the Ceramic Injection Molding (CIM) sector, Mingrui is one of the pioneers. we have been working with this innovative technology. It creates a perfect symbiosis between the process of ‘injection molding technology’ and the materials known as ‘high-performance ceramics’. The familiar mold design options for the processing of plastics, e.g. internal and external threads, internal recesses and ribs are all applicable to ceramic components through the use of injection molding technology. As well as the qualitative benefits of technical ceramics as materials, this also means that the injection molded part can, in many instances, also benefit in terms of economic viability, i.e. cost.
Ceramic injection moulding
Ceramic injection molding parts
Injection ceramic molding
injection molding ceramics
injection molded ceramic
small injection molding ceramic parts
Zirconia ceramic is the most mature of the engineering ceramics, offering excellent electrical
insulation properties together with high hardness and good wear resistance,but relatively low
strength and fracture toughness.Alumina ceramics are generally white but may also be pink or
ivory.The color is derived from either the sintering additives or impurities in the raw materials.
1. High hardness.
2. High heat resistance : Alumina ceramic has excellent thermal stability,which means that it is
widely used in areas where resistance to high temperatures is essential.
3. Good wear resistance : Alumina ceramic is the material of choice for alumina wear parts.
4. High electrical resistivity : Alumina is an electrically insulating material.
5. High corrosion resistance : It is insoluble in water and only slightly soluble in strong acid and
alkaline solutions. Good chemical stability of alumina leads to high corrosion resistance.
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium | | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | Ceramic Handling Arms Advanced Technical Ceramics for Semicondutor industry |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | Ceramic Handling Arms Advanced Technical Ceramics for Semicondutor industry |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .